Stiiizy Battery Not Working (Updated Info) Learn How to Fix It!

by

Seems you recently invested in a Stiiizy battery and it stopped working. Don’t worry for we know how to fix that! 

We go into great detail about the Stiiizy batteries in this article. We have covered every conceivable reason why the Stiiizy battery might not be functioning. To learn how to fix your Stiiizy battery, see this article. 

Stiiizyy Batteries: What Are They?

One of the top battery brands available is Stiiizy. In their goods, they use a potent 210mAh lithium-ion battery. As a result, there is no need to recharge the battery. You are able to experience life safely and without getting burned. However, the battery is unable to produce the higher temperatures. 

Even the BIIIG battery, a 550mAh rechargeable battery, is created by Stiiizy. It can also function at higher temperatures. These lithium-ion batteries feature an additional side that renders them ineffective and dead after a certain period of time. 

How to Know If Your Stiiizy Battery Is Not Working?

A quick way to determine the state of your battery is to look straight at the LED lights. Each STIIIZY battery has an integrated LED light as standard equipment. You can grasp the batteries a lot better if you look at the LED lights. Below, we provide a few of the examples: 

  • White Light: This signalizes that the Pod is on. 
  • White Light Blinking: If the white light blinks twice, the Pod has been placed properly. After a protracted draw, it flashes. This demonstrates that the battery’s capacity has been used up. 
  • Red light: The red light indicates that the Pod needs to be recharged. If it receives a full charge, it will automatically turn white. 
  • Blinking Red Light: A bad pod connection is simply indicated by a blinking red light. 

It would be helpful if you had in mind that when you check the battery, it ought to show as a white LED light. However, after the initial draw, it ought to appear as white light. It is an outstanding battery’s signal. 

Reasons for Stiiizy Battery Failure

There are several reasons why a Stiiizy battery won’t function, and we’ve listed a few of them below:

Lithium-ion has a lifespan of only two to three years. As a result, it may pass away after a certain period of time. 

If you consistently keep your battery at 100% or 0%, the battery could get worse. As a result, charging a battery to 80% rather than 100% is preferable. 

Additionally, the battery might only be functional if the cartridge is full. Consequently, you have to substitute the cartridge.

Additionally, if the connections inside the Pod are dirty, the battery might not function. 

If the pod atomizer burns out, the battery could not function. 

Let’s say you discover the Stiiizy battery isn’t functioning for some other reason. You can contact the Stiiizy’s customer service department. They’ll aid you in escaping the predicament. 

How to Fix a Bad Stiiizy Battery?

We have provided a four-step procedure to change the battery if your stiiizy battery is not functioning properly. 

Step 1: Recheck Your Old Battery  

You should first determine whether the battery or charging cord is the issue. To inspect the battery, you will require a pH pen. The pH pen’s tip must be inserted into the battery hole and left there for a short while. If the battery is damaged, the readout will be 4.6 or lower. 

The metal ends of the red and black probes can be placed at the top of the battery if you have a digital multimeter, though. If the reading on your multimeter is less than 50 kilohms when you set it to the ohms, the battery is no longer functional. 

Just keep in mind that while a pH pen may be simpler to use, a digital multimeter will provide a measurement that is more accurate. 

Step 2: Remove and replace the battery 

Use the screwdriver that you just took out to get rid of the old battery. To prevent them from getting misplaced, store your screws safely. Replace the old battery at this point and tighten all the screws. 

Alternately, you can use the contact to sell both the positive and negative ions in the battery. Isopropyl alcohol should also be used to clean up any messes created throughout the operation. 

One thing you should keep in mind is that soldering lithium-ion batteries carries some risk. Therefore, you need the right tools and gear; if you don’t have the right tools, you should stay away from it. 

Step 3: Test and charge the battery 

Hold down the Pod’s power button while checking the battery’s functionality. If the LED is blinking green, it is functioning properly. You must now charge this battery and wait for it to finish charging. 

However, you need to change the battery once more if your light doesn’t blink or blinks red. 

Step 4: Properly Dispose of the Old Battery

It is not advisable to simply discard the dead lithium-ion battery. Environmental degradation results from it. So, you ought to deliver these batteries to the producer or your neighborhood recycling facility. 

Final Words

One of the common batteries for pods is the Stiiizy battery. It includes a wonderful experience. It occasionally works, though. We have already covered the causes of the Stiiizy battery’s malfunction as well as solutions. We sincerely hope you enjoy the manual and learn everything you need to.

Frequently Asked Questions (FAQs)

Q1: Why won’t my Stiiizy batteries switch on?

Ans: A dead battery may be one of the most frequent causes of your Stiiizy battery not functioning. Typically, a lithium-ion battery lasts only two to three years. Incorrect battery care could result in a shorter lifespan. We advise against leaving your battery at either 100% or 0% all the time. 

Q2: What to do if Stiiizy stops functioning?

Ans: You might try charging the battery for 30 to 45 minutes at a low voltage to see if it helps. To remove any obstructions, you may also try striking the battery. So, use these suggestions to reset your Stiiizy battery. 

Q3: How is a Stiiizy battery tested? 

Ans: Your STIIIZY battery will feature an LED light at the bottom. Use this straightforward 3-step procedure to purge your Stiiizy battery.

Simply said, if the white light illuminates, the battery has been properly plugged into the Pod. 

It is preferable if the white light double-blinks. It demonstrates how to install the magnetic base properly. 

The incorrect insertion will be indicated if the red light flashes. 

Q4: How can you charge a Stiiizy that is dead?

Ans: Take the cord that connects to the micro-USB outlet out of the android charger and steal it. 

If you attached the Red and Black cable to the Stiiizy Pod, that might be helpful. 

Last but not least, attach your Mr cable to the power supply. 

You’ll be able to charge the Stiiizy Pod.

Latest posts by Akash Tiwari (see all)

Leave a Comment